- Install a graphics card how to#
- Install a graphics card drivers#
- Install a graphics card software#
- Install a graphics card Pc#
- Install a graphics card download#
Install a graphics card drivers#
Double-click on the driver file and the drivers will self install. If you downloaded the latest driver for your card from the Vendor site (either ATI or Nvidia) then you’ll be able to skip the wizard, and browse to the location where you downloaded the drivers.
Install a graphics card Pc#
Once the PC has powered up and logged into Windows, the PC should automatically detect the new hardware and begin the installation wizard. Now that the card is in place, reconnect the PC and switch on! It’s often best to leave the case-side off while you finish the installation, just in case you need to troubleshoot the installation if it doesn’t work. If this happens, loosen the backplate slightly and realign the card, again making sure it’s fully in the slot before tightening the screw again. Be firm, but gentle when attaching the power fittings as even the slightest knock can cause the graphics card to loosen slightly or not fully connect with the motherboard, causing your PC not to boot. Once you have the card firmly in the slot, screw it into the backplate and attach any power fittings the card might require.
![install a graphics card install a graphics card](https://i.ytimg.com/vi/1HH4_yn1Q_U/maxresdefault.jpg)
Don’t be scared to use a little force if required as the fit might be quite tight. Take the new card out of it’s anti-static packaging and again holding the card by the edges, line up the card with the slot and push down firmly, making sure the card goes all the way into the slot. If the two are level, you’re in the right place! Grasp the card by the topmost edges and pull the card out of the slot – try to pull the card out in a straight 90-degree angle to avoid damaging the slot. To make doubly sure, check the back of the PC and look for the D-SUB connector – this is the blue socket where your monitor plugs into. The graphics card is typically the top-most card in the PC. Now, locate the graphics card and remove the retaining screw from the graphics card backplate. Alternatively, wear an anti-static wristband which will draw electricity away from you and funnel it through the PC case. Now, before you actually touch the card inside, ground yourself in order to get rid of any static electricity you might have stored up – static electricity is very bad news for delicate electrical components! To ground yourself, touch a metal facing of your PC or a nearby radiator. Judge left and right by looking from the front of the case, and using an appropriate screwdriver, remove the retaining screws from the back of the case, laying the panel to one side. This is because you will need to remove the left-hand panel to gain access to the PC innards. Place the PC with it’s right-hand panel down on a sturdy work surface. The next step is where you need to get your hands dirty! Installing the New Graphics Card
Install a graphics card software#
When you have found them, highlight the entry and click on the ‘Change/Remove’ tab to remove the software and once finished, close down the PC. Once you have found it, look for reference in the program list for your current graphics card.įor ATI cards, it will say something like ‘ATI Display Drivers’, while for Nvidia cards, it will say something like ‘Nvidia Drivers’. To uninstall your old drivers, browse to your Control Panel and look for Add/Remove programs. You should always uninstall old drivers before installing new ones, even if the drivers are from the same vendor. This is very important as leaving the old drivers on your PC could cause conflicts with your new drivers and make your PC unstable.
![install a graphics card install a graphics card](https://assets.rockpapershotgun.com/images/2020/09/How-to-install-graphics-card-1.jpg)
Once you have downloaded the new drivers for your new card, it’s time to remove the old ones.
Install a graphics card how to#
Drivers are the software which interacts with your PC’s operating system, and provides the operating system with instructions on how to use the card.
Install a graphics card download#
However, there are a couple of things you need to do to your current system first before you do anything to the PC’s innards.įirstly, visit the vendor responsible for your new graphics card’s GPU (Graphic Processing Unit) and download the latest drivers for your card.
![install a graphics card install a graphics card](https://www.gpumag.com/wp-content/uploads/2020/06/PC-Power-Supply.jpg)
You’ll already have selected your graphics card so all that’s left is to fit it into your PC.